// Ambix configuration // Written by Ambisonic Decoder Toolbox, version 8.0 // Run by Gavin Kearney, University of York on 14-Nov-2016 15:07:41 // Note: The coefficient order, scale, etc. refer to the matrix below. // The inputs to the Ambix plugins will always be ACN/SN3D. // The loudspeaker order goes from top to bottom and counter-clockwise based on the // routing of the Audiolab Lebedev Sphere at the University of York. // Config file tested with Ambix plugin sute v0.2.6 in Reaper v 5.28/64. // Note that the Ambix panner uses clockwise angles in the UI, but the output is // Ambix format (flipped azimuth angles) consistent with the SADIE HRTFs. // http://www.sadie-project.co.uk //------- decoder information ------- // decoder file = Decoders/h1_v1_Octahedron_MaxRe_pinv/h1_v1_Octahedron_MaxRe_pinv.config // speaker array name = Octahedron(Max Re)H1V1Pseudo-inverse // horizontal order = 1 // vertical order = 1 // coefficient order = acn // coefficient scale = SN3D // input scale = SN3D // mixed-order scheme = HV // input channel order: W Y Z X // output speaker order: S01 S02 S03 S04 S05 S06 //------- #GLOBAL /debug_msg h1_v1_Octahedron_MaxRe_pinv_1_band /coeff_scale sn3d /coeff_seq acn /flip 0 /dec_mat_gain 1.000000 #END #HRTF 44K_16bit/azi_0_ele_90_DFC.wav 44K_16bit/azi_45_ele_0_DFC.wav 44K_16bit/azi_135_ele_0_DFC.wav 44K_16bit/azi_225_ele_0_DFC.wav 44K_16bit/azi_315_ele_0_DFC.wav 44K_16bit/azi_0_ele_-90_DFC.wav #END #DECODERMATRIX 0.288675 0.000000 0.500000 0.000000 0.288675 0.353553 -0.000000 0.353553 0.288675 0.353553 0.000000 -0.353553 0.288675 -0.353553 0.000000 -0.353553 0.288675 -0.353553 0.000000 0.353553 0.288675 0.000000 -0.500000 -0.000000 #END