Equipment Available:-

• HD Data Projector with Speakers
• Laptop Connection - VGA HDMI
• Hearing Loop

Using The System

The data projector can be turned on/off using the display buttons in the top left corner. The projector will take 1 minute to start / shut down, during this time the button will flash.

There is a volume dial for display sources. The LED display will indicate the current volume level.

Video sources e.g. laptop, can be selected at the press of a button, switching between sources may take a couple of seconds. Changing sources is not possible while the projector is starting up.

There are multiple laptop cables available in this room, if no image is shown, please check you have the right input selected for the cable used.

Laptop Connections

The following connectors are available on the teaching wall to connect to your laptop:-

• VGA
• HDMI
• Solstice

If your laptop does not have a suitable connector you will need the appropriate adaptor - www.york.ac.uk/campusservices/avcentre/instructions/laptopcon.cfm

Hearing Loop

This room has an induction loop hearing system available.

At the end of your session

Use the button to turn the projector off.

Need More Help?

If you need urgent assistance, please call the duty technician on x3036 (01904 32 3036). This will be transferred to a mobile phone after 30 seconds.
If you have technical or equipment booking queries, please call us on 01904 32 4500.
We can provide 5 minute briefings at the start of your teaching session - these are bookable on our standard equipment booking form.
www.york.ac.uk/campusservices/avcentre/bookings
We can also provide 1 to 1 and group training sessions on request. Please email av@york.ac.uk to arrange these.
Please report all faults with this equipment as soon as possible, to enable us to repair them quickly.

Printed:25/04/2024